How does the single punch press make the perfect tablet?

Release time:

2022-05-06 09:21

Source:

Some customers will not use it after buying it.single punch tablet pressThe. They think it's the machine that can't press down on the table©t. They think there is something wrong with the machine, so they c→an't press into the tablet. It's the same old saying: "If you don't use it, you don't need it." ≠The following is a brief introduction to how a single punch press makes perfect tablets.

If you want to press a completeTabletsIt depends on its compressibility. Not all materials are suitable for tabletting. Before tablettinδg on a single-punch tablet press, pay attention to the f₹ollowing points:

1. Is this material made into particles?

If the material is powder, the split rate of the extruded tablet is very high, s™o the material needs to be made into 40-60 mesh particles first.€ If you make pellets, you need to use our swing granulatorγ. The pellets made by the swing granulator fully meet the standards of tabletting.

2. Is the material sticky?

Some materials have low water content and are not sticky. Here, we need€ to add some adhesive to the material. As for what to use for adhe≤sive, this needs to be prepared by customers themselves.

3. Is the material fluid?

The material is too sticky to work, for fear of continuous impact. If the &particles are too large, they cannot be discharged from the cup. If the discharge amount is €not uniform, it will be difficult to form a tablet. So just now the a≈uthor also mentioned that the particle size of the material should be controlled at 40-60 mesh•.

Is the pressure adjusted correctly?

The pressure of the single-punch tablet press is too small, and the tabletting effect is not good<. If the pressure is too high, it will be stuck and can only be tested at 1.1 pointφ when the pressure is adjusted. Do not adjust the pressure to the maximum,π as this will damage the machine.

Before we insert the voltage sheet, we can adjust itγ with a manual pressure sheet. After the manual tablet press is adjusted, the electric tablet preβss will naturally have no problem.

Key words:

Laboratory Equipment

Packaging Equipment

pharmaceutical equipment

Pharmaceutical machinery

What if the punch of the single-punch tablet press is glued?

Characteristics and Maintenance of Single-punch Tablet Press

The working principle of the catalyst tablet press is mainly based on powder compaction technology✘. By the action of high pressure, the catalyst raw material powder is filled into a mold,& and a solid tablet having a certain shape and hardness is formed through a pressing proβcess. In this process, the tablet press adjusts parameters such as pres∞sure, speed and time through a precise control sys₹tem to ensure the uniformity and stability of the pressed" catalyst tablets.

Catalyst tablet press efficient production weapon for chemical industry

Catalyst tablet press, as an important equipment in the field of modern chemicalα industry, is specially used to compress catalyst raw material λpowder under high pressure to form catalyst tablets in solid shape. This equipment not on$ly improves the production efficiency of the catalyst, but also has a profound impact on the pro∏duction efficiency and environmental protection of the entire chemical iβndustry.

Three-layer tablet press key equipment for pharmaceutical and chemical industry

The three-layer tablet press is an efficient and vers‍atile pharmaceutical and chemical production equipment that can↔ compress powdered materials into tablets or granules of various shapes and specifications. This ki✔nd of equipment is widely used in pharmaceutical, chemical, f÷ood and other industries, and is an indispensable part of the production pro☆cess.

Three-layer tablet press assistant in the pharmaceut♣ical and chemical industry

The three-layer tablet press is an efficient and versatile pharm<aceutical and chemical production equipment that can compress powdered& materials into tablets or granules of various shapes and specifications.™ The equipment in the pharmaceutical, chemical, food and other industries have a w"ide range of applications, become an indispensable tool in these∏ industries.

Three-layer tablet press Production weapon for pharmaceuti¥cal and chemical industry

The three-layer tablet press is a highly efficient and versatile pharmac₹eutical and chemical production equipment that can compress powdered ma'terials into tablets or granules of various shapes and specifications. This kind of equip✔ment is widely used in pharmaceutical, chemical, food and other industries, and ha¶s become an important tool to improve production efficiency and ¥ensure product quality.

Three-layer tablet press high-performance powder material pressφing equipment

The three-layer tablet press is mainly composed of upper and ↕lower tablet wheels, intermediate conveyor belts, and related metering, feeding and driving sy stems. During operation, the material is fed through an intermediate conveyor belt to be co∞mpressed between two tabletting wheels to form tabl★ets or granules. The equipment adopts modular design, whic×h is easy to install, debug and maintain. At the same time, it' is equipped with advanced PLC programmable control system to &realize automatic production.