What if the punch of the single-punch tablet press is gl<ued?

Release time:

2022-06-06 15:34

Source:

　　single punch tablet pressThe reason for sticking the die and its treatment: sticking the die me ans that the punch and the die stick the fine powder ♣on the surface of the tablet when pressing the tabl®et, causing the surface to be uneven and concave, and the lettering punch is easier to st←ick.

1. The surface of the punch of the single punch press is damaged ₽or the surface finish is reduced, and there may be anti-rust oil or lubricating oil. The surface of± the new mold is rough or the lettering is too deeφp and angular. Punch can be wiped clean. Replace the unqualified die or wipe the surface of theπ lettering punch with a small amount of liquid paraffin✘ to lubricate the end face. In addition, if mechanical heat causes¶ viscous impact, check the cause and repair the equipment.

2. The lettering design is unreasonable, replace the punch or change the character design.

3. The moisture content of the particles is too high or the dry and wet ¶are uneven, resulting in bonding. Countermeasures: control the particle moi•sture content in 2% ~ 3%, strengthen the dry particle inspection.

4. Insufficient or improper selection of lubricants for single-punch taλblet presses, or too much fine powder. Should be appropriate to increase the amount of lu↓bricant or replace the new lubricant. Remove excess fines.

5. The fineness of raw and auxiliary materials varies greatly, resδulting in uneven mixing or improper mixing time. Solution: crushing,δ screening of raw and auxiliary materials, so that its finene€ss in line with the quality requirements of the variety, master and control the mixing time.

6. Due to low glue concentration or poor glue amount, poor adhesion,¶ too much fine powder (more than 10%). Solution: Sift out the fine powder with a 40- mesh sieve, re-granulate, dry, complete the granulatλion, mix the whole batch evenly, and then press.

7. The viscous shock is caused by the raw material itself (e. g. wetting). Solution: add a ‌certain amount of absorbent (such as 3% calcium hydroge♣n phosphate) to avoid adhesion.

8. The environmental humidity is too high, reduce the enviro£nmental humidity.

9. High temperature in the operating room of single-punch tablet press is easy to cause v$iscoelasticity. Attention should be paid to reducing the operating room temperatλure.

Key words:

Laboratory Equipment

Packaging Equipment

pharmaceutical equipment

Pharmaceutical machinery

Brief Introduction of Related Knowledge of Single-punch Tablet Pr®ess

How does the single punch press make the perfect tablet?

The working principle of the catalyst tablet press is mainly based on powder compaction technolo♥gy. By the action of high pressure, the catalyst raw material powder is filled into a mold, and a s☆olid tablet having a certain shape and hardness is formed through a pressing process.₹ In this process, the tablet press adjusts parameters such as pressur€e, speed and time through a precise control system to ensure the un←iformity and stability of the pressed catalyst tablets.

Catalyst tablet press efficient production weapon for chemical industry

Catalyst tablet press, as an important equipment in the field of modern chemical industry, is sp×ecially used to compress catalyst raw material powder under high p ressure to form catalyst tablets in solid shape. This equipment not only improves the production e"fficiency of the catalyst, but also has a profound impac±t on the production efficiency and environmental protection of the entire chemical industr>y.

Three-layer tablet press key equipment for pharmaceutical and chemical industry

The three-layer tablet press is an efficient and versatile phaαrmaceutical and chemical production equipment that can compress ≠powdered materials into tablets or granules of variou∑s shapes and specifications. This kind of equipment is widely used in pharmaceutical, chemi♠cal, food and other industries, and is an indispensable part of the 'production process.

Three-layer tablet press assistant in the pharmaceutical and chemical' industry

The three-layer tablet press is an efficient and versatile pharmaceutical and ch emical production equipment that can compress powdered materials into tablets or granules of various shapes and specifications. The equipment in the ‌pharmaceutical, chemical, food and other industries have a wide range of applications, becom←e an indispensable tool in these industries.

Three-layer tablet press Production weapon for pharmaceutical and♥ chemical industry

The three-layer tablet press is a highly efficient and versatile₩ pharmaceutical and chemical production equipment t¶hat can compress powdered materials into tablets or granules of various shapes and specifications✘. This kind of equipment is widely used in pharmaceutical, chemical, food &and other industries, and has become an important tool to improve production effici&ency and ensure product quality.

Three-layer tablet press high-performance powder material pressing equipment

The three-layer tablet press is mainly composed of upper and lεower tablet wheels, intermediate conveyor belts, and related metering, feeding and driv₹ing systems. During operation, the material is fed through an intermediatΩe conveyor belt to be compressed between two tabletting wh♠eels to form tablets or granules. The equipment adopts mod©ular design, which is easy to install, debug and maintain. At the same t★ime, it is equipped with advanced PLC programmable→ control system to realize automatic production.