three-layer tablet pressIt is a combination of electric and manual models. The> machine has a simple structure and strong working efficiency. It is suitable for pres'sing powder and granular materials into Western medicine tablets, Chinese medi•cine tablets, disinfection tablets, Kou Jue tablets, sugar tablets, and special-shaped tabletλs., Milk tablets and other tablets of different shapes. Suitabl★e for pharmaceutical, chemical, universities, hospitals and other inεdustries production and experimental use. _Multifunctional Tablet Press_Catalyst Tablet P↔ress_High Speed Tablet Press_Disinfectant Tablet Press_Tablet Press 
　　

three-layer tablet pressEasy to use, easy to repair, small size, light weight, the surface of the produ₽ced tablets is smooth, no cracks, uniform weight, the tablets do not stick to the mold, ↔the mold has a long use time, and the tablets can be packa♣ged and stored without polishing, thereby Improve production efficiency,‍ reduce production costs, and increase output. _Multifunctional Tablet Press_Catalyst Tabl₽et Press_High Speed Tablet Press_Disinfectant Tablet Press_Tablet Press

three-layer tablet pressOperation skills:
1,three-layer tablet pressBefore use, all oil cups, oil holes and friction surfaces must be added with lubricating oil, αand the car should be run empty to make each friction surface covered with oil film to extend &the service life of the machine.
21. Before each shift and after each shift adjustment, the pressure test must be performe♥d with empty machine. If there is no problem, the electric tablet can be tu​rned on, which can prolong the service life of the mold.
3Selection of sheet type (mold):three-layer tablet pressThe upper and lower working end faces of the die form the surface s<hape of the tablet, and the diameter of the middle die is the diameter of the tablet. The correct ∑choice of sheet type is the first step to the success of the die. For example, chewable tabεlets have high requirements on hardness and can be chewed conven‍iently. Most of them are flat tablets of hypotenuse type. If film coating is required, shallow ©concave can be selected. Deep concave die is easy to damage, asπ little as possible.
4When replacing the mold, if the middle mold cannot go dow"n, the middle mold can be gently knocked down with a stick of the same size as th‍e upper mold.
5, inthree-layer tablet pressThe quality of tablets (weight, hardness, surface finish, etc.) must be c hecked frequently during tabletting and adjusted in time.
6If the material with large content of mineral and plant fiber, large diameter and λpoor viscosity is pressed, low-speed tabletting should be ★adopted. High speed generally does not exceed25Turn/Points. On the contrary, if the compacting viscosity,↕ good fluidity, small chip diameter, easy to form particles, you can choose a higher spe"ed.
7,three-layer tablet pressMold preservation method: after cleaning, coated with a layer of food grade lubricating oiπl (oil, edible oil can be), put into a special protective box or die storage box, plac ed on the rack, should be marked with specifications and dimensions,& stored on the rack.
8,three-layer tablet pressWhen the tabletting room is operated or not operated, it is closed with plexi✘glass to prevent pollution.
9, every daythree-layer tablet pressAfter use, the remaining powder particles should be taken out and all parts of the ma¥chine should be cleaned. If it is stopped for a long tim≈e, the die must be removed and the friction surface of ♦the machine must be removed. The working surface shall be cleaned, coated wi&th anti-rust oil, and covered with dust-proof clothing; the stamping die shall be clea☆ned and immersed in oil for preservation.