laboratory tablet pressThe powder granules can be compressed into tablets, ≈which are widely used in pharmaceutical factories, ch emical plants, hospitals, scientific research institutioλns, laboratories, trial production and small batch production. The powde♦r tablet press has excellent performance, strong adaptability, convenient use a↑nd maintenance, small size, light weight, and can be s>haken manually when there is no electricity. The filling depth and t>hickness of the powder tablet material can be adjusted to m&eet the requirements of the pharmaceutical industry for pre♦ssing various similar products. So what are the precautions for operating the laboratory tablet✘ press?

What are the precautions for operating a laboratory tablet press?

Before use, check whether the specifications of the mold used are consiste∑nt with the required specifications. Before installing φthe mold, wipe it with a clean cloth and then wipe it with 75% ethanol. After et©hanol volatilization, installation and use. During installation, pay attention to check∏ whether the male and female dies are consistent. Pay special atteδntion to handle with care. At the same time, be careful not to mix old and new↕ molds. When necessary, the control and influence of weight differences​ should be evaluated or tested. Precautions for the use βof laboratory tablet presses:

1. Regularly check whether the amount of oil in the oil pool reaches 3/4 (after the working piston₩ is reset). If the height is not enough, open the scr↓ew of the oil injection hole and inject 46# hydraul≈ic oil without impurities.

2. Regularly lubricate the small piston and its connec₹tion parts.

3. Tighten the oil hand wheel appropriately to prevent oil overflow anγd keep it clean.

4. When the working piston needs to rise to a certain height, pay attention to the wεorking piston can not exceed 1/2. so as not to dama×ge the parts.

The pressure of the machine should be less than 44Mpa(15 tons). Exceeding t®he limit can damage the machine or cause danger. Remind the oper ator not to overpressure.

6. When the new machine is not used for a long time, tighten t♦he oil hand wheel before use and pressurize 20-25 MPa; That is, di€scharge, repeated use several times can be used normally.

7. When operating the machine, remove the sealing tape from the screw of the oil fil→ling hole and use it normally.

8. The pressure plate needs to be installed on a workbench with sufficient strength. If neces÷sary, it should be fixed on the workbench.

9. Before transportation/handling, please tighten the exhaust valve to prevent oil leakage.

What is the development history and current situation of laboratory tablet> press?

1. The tablet press has many specifications and large quantities. The ta"blet press is an ancient pharmaceutical equipment in China, wδhich can be used to press round thin plates, lettering thin p lates, special-shaped thin plates, double-layer thin plates, multi-Ωlayer thin plates, ring thin plates and chip-coated thin plates. The number, variety, s"pecification and output of tablet press manufacturers rank first in the world.

In recent years, tablet press manufacturers began to attach importance to product ♦quality and believe in the business philosophy of "winning by q→uality. The developed tablet press product has the characteristics of simple ope÷ration and convenient cleaning, especially when changing varieties.

Low technical content and insufficient technologicaσl innovation. There are more than 40 pharmaceutical equipment enterprises in China,β producing more than 60 kinds of tablet presses. Although ±new products are launched every year, there are few varieties with higδh technical level and high added value. Product duplication development is serious, plagiarism p≥revails. In order to survive, many small pharmaceutical equipme€nt companies not only adopt a "imitation" strategy in technological innovation, but som​e manufacturers even rely entirely on copying other people's technology as their own technological ≈innovation. In order to compete for orders, we often lower our prices. Due to± the low brand loyalty, after the price war, these brands will suffer more losses, which will ∞inevitably lead to the overall retrogression of China's tablet computer design and manufacturing l§evel.

4. The vast majority of enterprises in China are private∑ enterprises, which have no advantages in technology, equipment↓ and talents, which seriously restricts the technol↑ogical innovation of enterprises. Some enterprises lack research and development, t​he institutional innovation system is not perfect, the technical personnel lack the awarenessε of technological innovation, the overall technical stren÷gth of enterprises is not strong, and the speed of updating ‍scientific research and production technology and equipment is very slow. It is worth ★noting that the entire industry of science and technology talents are in the "no contact"€ stage. It can be said that the talent crisis is spreading throughout the‌ industry.