Installation of Die for Tablet Press

Release time:

2020-11-20 12:36

Source:

　　1、press diePreparation before installation: remove the hopper and feeder, open the right door, and turn the h×andwheel to clean the working surface of the turntable, the die hole and the di§e to be installed. Rotate the pressure regulating take-up whee₹l to minimize the pressure and remove the underrush loading and unloading rail.

2. Installation of the middle die: Unscrew the fastening screw of th§e middle die on the turntable about 1mm out of the outer circle of the turntabl↓e. Pay attention not to collide with the powder suction nozzle and oth®er parts. It is advisable not to collide with the head of the screw when the middle die is insλtalled. The middle die device is relatively tight and should be placed smoothly. Pierce the rod' into the upper punching hole and then gently drive it in. After the middle die into the hole,ε its plane is qualified.

3. Installation of upper punch: first remove the inlay tongue, then insert the uppe✔r punch rod into the hole, rotate the punch rod with thumb and index finger, an↔d check the flexibility of the head to slide up and down i↓nto the middle die. If there is no jam, it is qualified. Then turn the hand whe€el until the neck of the punch rod contacts the parallel÷ rail. After the upper punch rod is completely installed, install the inlay ±tongue.

4. Installation of undershoot: install according to the method of≥ overshoot, and install the undershoot loading and unloading rail after in§stallation.

　　5、press dieTrial operation: after the complete set of molds is iΩnstalled, turn the handwheel to rotate the turntable for 2 weeks, and observe the oper≈ation of the upper and lower punches entering the miεddle mold hole and on the track. No blocking and co™llision are found to be qualified. It should be noted that the highest point (I .e. the <film outlet) should be 0.1~0.3mm higher than the working surfaceε of the turntable, close all doors, start the motor, i☆dle for 2 minutes, and use it after stable operation.

The above is some knowledge about the installation of Ωtablet press dies for your reference. I hope it can be helpful to you. If you need tablet press ♥dies, please feel free to contact us!

Key words:

Laboratory Equipment

Packaging Equipment

pharmaceutical equipment

Pharmaceutical machinery

Diversified requirements for the structure of tablet presses

Classification of die for tablet press

The working principle of the catalyst tablet press is maαinly based on powder compaction technology. By the action of h★igh pressure, the catalyst raw material powder is filled into a mold, and a solid tablet h§aving a certain shape and hardness is formed through a→ pressing process. In this process, the tablet press adjusts paramete→rs such as pressure, speed and time through a precise control system to ∞ensure the uniformity and stability of the pressed cat¶alyst tablets.

Catalyst tablet press efficient production weapon for chemical induαstry

Catalyst tablet press, as an important equipment in the field of modern ↑chemical industry, is specially used to compress catalyst raw♣ material powder under high pressure to form catalyst tablets in solid shape. Tαhis equipment not only improves the production efficiency of the catalyst, but also has ←a profound impact on the production efficiency and e±nvironmental protection of the entire chemical industry.

Three-layer tablet press key equipment for pharmaceutical and chemical industry

The three-layer tablet press is an efficient and versatile phδarmaceutical and chemical production equipment that can compress powdered materials into tablets or granules of various shapes and "specifications. This kind of equipment is widely used in pharmaceutical, chemical, food and& other industries, and is an indispensable part of the production process.

Three-layer tablet press assistant in the pharmaceutical and chemical industry

The three-layer tablet press is an efficient and versatile pharmaceutical and chemical p$roduction equipment that can compress powdered materials into tablets or granul♦es of various shapes and specifications. The equipment in the pharmγaceutical, chemical, food and other industries have a wide≤ range of applications, become an indispensable tool in these ind✔ustries.

Three-layer tablet press Production weapon for pharmaceutical and chemical industry

The three-layer tablet press is a highly efficient and versatile pharmaceutical and chemical pr↓oduction equipment that can compress powdered materials into tablets or granu•les of various shapes and specifications. This kind of ∞equipment is widely used in pharmaceutical, chemical, foo d and other industries, and has become an important to↓ol to improve production efficiency and ensure product quality.

Three-layer tablet press high-performance powder material pressing eq₹uipment

The three-layer tablet press is mainly composed of upφper and lower tablet wheels, intermediate conveyor↕ belts, and related metering, feeding and driving systems. During operationα, the material is fed through an intermediate conveyor belt≤ to be compressed between two tabletting wheels to form tablets or granules. The equipment ad★opts modular design, which is easy to install, debug and maintain. A→t the same time, it is equipped with advanced PLC programmable cont<rol system to realize automatic production.